|
4)
Océ Arizona 350 XT launched
The Océ Arizona family of digital flatbed printers has
expanded yet again with the introduction of the large Océ
Arizona 350 XT. This latest model in the Océ
Arizona family is capable of producing rigid prints as large as 2.50 x 3.05
meters. A White Ink Option and a Roll Media Option are also available. The
extra width of the Océ Arizona 350 XT enables the
printer to be used in a continuous imaging mode for rigid media up to 1,25 x 2,50 m. Two rigid boards of this size can be mounted
on separate vacuum areas of the flatbed table. While one board is being
printed, the other can be changed by the operator. Since the printer never
has to stop printing for a media change, users can significantly increase
their net print production on boards this size. With the Roll Media Option
installed, users can print onto flexible media up to 2.2 m wide. The Océ Arizona 350 XT features production print speeds up to 23 sqm/hr on rigid media
and up to 17.5 sqm/hr using the Roll Media Option.
The Océ Arizona 350 XT is ideal for producing a
wide variety of display graphics such as event graphics, point-of-purchase
displays, limited-term signage, banners, backlit and reflective rigid
displays, transit advertising, and directional signage. But because of its
ability to print on a range of materials not predetermined simply by “square,
flat and thin” and its support of white ink, the Océ
Arizona 350 XT can produce applications beyond the norm including custom
furniture, glasswork, fixture enhancement, fine art, or nearly anything that
the imagination can conceive.
More information: www.oce.com
Top
5)
Mimaki launches JV33-260 with Bulk Ink
Supply and Auto Media
Mimaki Engineering Co Ltd. is proud to
announce the superwide inkjet printer JV33-260. The
2.60 m (103") wide machine is equipped with Mimaki's
Auto Media Feeder (AMF) for rolls up to 100 kg (220 lbs.) as standard feature
and Mimaki's bulk ink supply system (MBIS). Superwide printer models require a secure media handling
especially for heavy rolls and substrates. The new AMF (automatic media
feeder) comes as standard on the JV33-260, thus ensuring outstandingly exact
media tension control over the whole printing width of 2.6 m even when using
roll-based substrates of up to 100 kg for superb print quality. In addition
JV33-260 incorporates Mimaki's print assist
function for two-sided print enabling edgeless printing while printing on
both sides of transparent substrates that can be seen without backlight in
daylight conditions or with backlight in the dark for superb vivid prints.
Operating costs can be decisively reduced by employing Mimaki's
new bulk ink system (MBIS) another feature of the machine. The JV33-260 is
available in both solvent and water-based versions. Especially for dye
sublimation printing substantial cost reduction can be achieved by using the
new Sb52 2 liter ink containers and MBIS.
More information: www.mimakieurope.com
Top
6)
Gandinnovations: Intelligent robotics
Gandinnovations brings robotic technology to the grand format digital print world
with the creation of its high-speed automatic loading robot, affectionately
called H.A.L. which stands for ‘High-speed Auto Loader’. H.A.L. was designed
to work in synchronization with all Jeti True
flatbed digital printers to achieve maximum production efficiency. “Robotics
is a branch of engineering which involves the conception, design, manufacturing,
and operation of robots, what we’ve done is overlap this technology with
electronic engineering and artificial intelligence to produce the ultimate in
productivity,” says James Gandy, CEO at the company's Canadian-based
manufacturing facility. Designed to run 24/7, H.A.L. will boost the
production speed of any Jeti True Flatbed. It can
handle materials simultaneously on two Jeti Flatbed
printers’ situated back to back using new configurable technology and
software that surpasses conventional automation or manual solutions. H.A.L.'s ‘magic eye’ – an intelligent camera station –
evaluates the condition of material for damages and pre-determines the
position to ensure perfect loading every time. H.A.L. also scrutinizes the
job for contamination between the transfer head vacuum cups and material
between pre-selected cycles. H.A.L. is capable of handling thin, flexible or
rigid, non-porous materials up to 10 mm thick, of 1.2 m x 2.4 m and 1.5 m x 3
m sheet sizes with stack heights up to 127 cm and operates with a fully
enclosed safety cell with safety interlocks.
More information: www.gandinnovations.com/HAL
Top
7)
Gerber: New Solara
ion option packages
 Gerber Scientific Products is
proud to announce their newest offerings for the Gerber Solara
ion family of wide-format UV inkjet printers. These new options make the
Gerber Solara ionX and
the recently introduced Gerber Solara ionV more flexible and more affordable, expanding the
wide-format inkjet market to reach a broader range of customers. The Gerber Solara ionX is now available in
a more affordable flatbed-only configuration. The Gerber Solara
ionX flatbed-only model is priced significantly
less than the original Gerber Solara ionX, but offers the same high quality printing with
brilliant, outdoor durable, GerberCAT cationic
inks. It is a flexible alternative which minimizes the up-front cash outlay,
while providing a future upgrade path to full Solara
ionX functionality. The flatbed-only Gerber Solara ionX can be upgraded to
a fully functioning Gerber Solara ionX by adding a field-upgradable
Roll-to-Roll option. The new Gerber Solara ionV offers Print Head and Roll-to-Roll upgrades now.
Increase the productivity of the Gerber Solara ionV with the field-upgradable
Print Head option which doubles the number of print heads from four to eight.
The resulting configuration replicates the design of the Gerber Solara ionX with two of each
color print head: cyan, magenta, yellow and black. The Gerber Solara ionV roll-to-roll
upgrade is a heavy-duty roll system and a winding unit which pulls flexible
material across the roll-to-roll platform using a series of precision crafted
friction cylinders. The result is accurate printing on roll stock using the
ultra-flexible GerberCAT inks. The Roll-to-Roll
upgrade expands the size of the Gerber Solara ionV flatbed from 162.6 cm x 254 cm to 162.6 cm x 304.8 cm,
making it a true 152.4 cm x 304.8 cm flatbed printer.
More information: www.gspinc.com
Top
8)
SIIT: Mesh Printing Kit for ColorPainter H-104s Mild-Solvent Printer
Seiko I Infotech Inc. (SIIT) announced that it will launch a mesh
printing kit as an option for the ColorPainter
H-104s mild-solvent inkjet printer. The new mesh printing kit enables the
printer to print on mesh media with no liner. It includes a mesh print ink
tray and tension adjustment system. The mesh print ink tray is set on the
platen rail of the printer; and the mesh print absorbent sheet put down on
the ink tray catches ink going through the perforations of the media. This
method eliminates the need for liner paper, which was required for mesh
printing on the former ColorPainter series. The
tension adjustment system allows the operator to adjust the media tension
accurately all over the entire media feeding area, printing area, drying area
and taking-up area. The system ensures the flawless printing and taking-up of
a wide range of mesh media available in the market. Once the kit is
installed, it is very simple to switch the printer from a mesh media printer
to a normal media printer and vice versa. The mesh printing kit and its
consumables will be sold through SIIT channel partners worldwide.
More information: www.seiko-i.com
Top
9)
Drytac to unveil revolutionary new
product at Sign & Digital UK
Drytac Europe Ltd will be exhibiting and
demonstrating a wide range of mounting and laminating consumables and
machinery at this year’s Sign and Digital UK, along with the unveiling of a
new and exciting addition to their liquid laminating range for 2009. Drytac’s new generation of liquid laminators is expanding
with the launch of Drytac’s revolutionary addition
to their range. This is an exciting new introduction, which will transform
wide format laminating and its possibilities. More information will be
revealed soon. For first hand regular demonstrations and to get first look at
their new machine, visit their stand at Sign & Digital UK 2009.
Sign
& Digital UK 2009: Hall 7, booth C 28
More information: www.drytac.com
Top
10) Xaar Electron and Xaar
Proton: Two next-generation printheads
Xaar has launched two new printheads which bring significant performance benefits
to the wide and grand format inkjet print markets. The new entry-level,
high-speed Xaar Electron and the premium
high-productivity, wide-swathe Xaar Proton are
next-generation Platform 1 binary printheads. Xaar has worked closely with several leading printer
manufacturers in order to coincide the global launch
of the new printheads with the commercial launch of
next generation wide format printers incorporating the technology. With the
addition of these new printheads to Xaar’s range, which now features a choice of eight models
each with multiple versions, manufacturers can select the best technology for
their specific application. Manufacturers have welcomed the design and
flexibility of the Xaar Electron and Proton printheads and their compatibility with a wide range of
solvent and UV inks. Integral electronics and ease of integration with
existing drive electronics streamline manufacturing to a high degree.
More information: www.xaar.com
Top
11) ColorGATE puts Version 5.30 on the market
PRODUCTIONSERVER5 (PS5) Version
5.30 is now even more optimized in terms of productivity and quality, with
new Modules for reliable printing cost management or for quick color
transformations at the nearest retailer. As a new add-on in PRODUCTIONSERVER5
the COST CALCULATION Module (CCM) is available. It allows to calculate the
print costs in a print system and to prepare a report for a comprehensible cost
overview. With the optional CCM the user can evaluate and report the exact
material consumption (ink and paper) of print jobs before the printing
process is started. More productivity through the calculation of production
costs even before printing, the creation of detailed
production costs reports as well as through the software integrated and
automated cost calculation process. With the COLOR SERVER Module (CSM)
another workflow has been added to the ColorGATE
flagship product. All processable image files in
PRODUCTIONSERVER5 can now be color converted without a direct printer output.
Main application field is the indirect connection of printing systems, for
which a direct driver is not available. Other high performance LFP systems
whose RIP solution might be outdated by now can achieve a modern production
level by inserting PS5 with CSM in the production workflow.
More information: www.colorgate.com
Top
12) Caldera achieves L65500 RIP
certification
Caldera
has achieved official certification as an HP development partner for its
Raster Image Processor (RIP) Certification Program supporting the new HP
L65500. Caldera was judged on an extensive set of criteria to verify the
compatibility and integration of the Caldera products with the HP Designjet L65500, to provide an optimal printing
performance. Only products that have undergone testing by HP and have met the
necessary performance requirements are awarded Certified for HP Designjet L65500 status. Certification tests for the new
HP L65500 include print quality, productivity, and the range of HP and custom
media profiles that can be supported.
More information: www.caldera.eu
Top
13) ONYX Graphics certified for HP Designjet L65500 Latex Printer
 The ONYX
Driver Development Team has worked closely with HP to develop a custom driver
and a wide range of media profiles for HP's new Designjet L65500 Latex Printer. The ONYX driver for the
HP L65500 was fully certified under HP's L65500 RIP
Certification Program and is available now. ONYX’s Designjet L65500 certification helps ensure maximized
productivity, decreased costs, and optimum output quality. HP's L65500 certification program includes an exhaustive
set of criteria to verify RIP compatibility and integration, therefore
ensuring maximum printing performance. ONYX’s HP
L65500 certification involved passing stringent tests in the areas of dynamic
printer media retrieval, job creation, printing performance, generic ICC
profile support, HP media support, and HP Professional PANTONE Emulation.
Availability for ONYX Channel Products: The HP L65500 printer driver is
included in ONYX ProductionHouse Version 7.2
software packages purchased after November 1, 2008. An extensive set of ready-to-use profiles
can be downloaded from the ONYX Profile Download Client included in Version
7.2, as well as from the ONYX web site.
More information: www.onyxgfx.com
Top
14) 1000th Avery Graphics ICC profile
posted on the web
Avery
Dennison recently added its 1000th ICC profile for Avery Digital Print Media
to its web database, which now offers the largest selection of free media
profiles in the industry. At the same time it made the database easier for signmakers to access by creating a separate, dedicated
support portal: http://avery.color-base.com. Customers can access and
download all existing settings and media profiles for a broad range of
printer-ink-RIP combinations, and request new ones, once they have registered
with the site. As a bonus, they can also benefit from regular updates from
digital print experts, and tips and tricks for downloaded media profiles and
registered equipment. To register with the Avery Graphics ColorBase
database, simply go to http://avery.color-base.com, click on 'Register',
complete the required information, and click on 'Save'. You will receive by
email a confirmation link. Click on it to complete registration. Avery
Digital Print Media, and all other Avery Graphics-brand self-adhesive graphic
arts products, are available from the extensive network of Avery Graphics
distributors throughout Europe.
More information:
www.europe.averygraphics.com
Top
15) Bordeaux Digital PrintInk:
Protecting the environment
Making
inks “greener” is a primary focus of Bordeaux. It is all about reducing VOC
(Volatile Organic Compounds) containing Hazardous Air Pollutants (HAP’s) levels in inks products. Bordeaux refer to himself “The Green Ink
Experts”. The reason for this is based on their “Green Focus” which is: To
continue the program of improving their mainstream ink families to make them
"greener"; Their efforts go toward the “greening” or use of more
environmentally oriented solvent systems having lower VOC’s,
HAP’s and higher (more favorable) PEL’s in all their current products. The Development of a
unique family of “Green inks” based on the use of non-hazardous,
non-polluting and non-HAP solvent system. Bordeaux “Green inks” and their other Eco
oriented solvent-based inks are produced without sacrificing any of the
qualities needed. In other words, the achievement of “Green Quality” is made
without sacrificing fast drying, low odor, superior color gamut, media
versatility, excellent adhesion, and outdoor durability. “Green inks” are not
made with expensive or experimental products, but with an available organic
derivative that Bordeaux’s skilled R&D team spent countless hours to
formulate into a high quality and high stability ink.
More information: www.c-m-y-k.com
Top
16) SEAL Graphics: Roll Up, Roll Up –
Get your savings here
Under the
slogan ‘Pop ‘n Roll’, SEAL Graphics is seeking to
reposition its vast range of display products including a new film that
should quickly find popularity among producers of Roll-Up, Pop-Up and Banner
displays. Called Print Shield Crystal Lite, the new
140 micron laminate is a lightweight, textured polypropylene film, used with
a water-based adhesive, which is ideal for producing uniform, eye-catching
display panels. PS Crystal Lite enables producers
to achieve cost reductions and is ideal when the graphics application requires
a thinner construction or less rigidity. It is produced to match the industry
standard sizes including 914 and 1067mm widths as well as SEAL Graphics’
best-selling finishing materials sizes of 880 and 1040mm. To assist producers
and end-users discover the optimum solution for their display requirements,
SEAL has produced an advisory matrix divided into both ‘Premium’ and,
lower-cost, ‘Base’ quality materials. It can be downloaded from the company’s
web site.
More information: www.sealgraphics.com
Top
17) Sihl presents SpiriTac
Film SA 190 + Spirit Film 130
 Sihl
presents the SpiriTac Film SA 190 (glossy 3675) and
the Spirit Film 130 (glossy 3642). SpiriTac Film SA
190 is a clear microporous coated polyester film
with a special removable self-adhesive backing, which is covered with a PP
release liner. After application onto glass or acrylic glass the film can be
quickly and easily removed without causing damage or leaving behind residues.
The Spirit Film 130 can be used both in reprographic offset and screen
printing as well as in the backlit sector. The microporous
coated PET film has a clear coating with a low Dmin.
When printed, it achieves a transmission optical density of at least 3.0 in
dark sections and is therefore ideal for use as a reprographic film with
black ink, but also as a large-format slide. Thanks to Sihl's
microporous SuperDry
technology, both products achieve an unbeatably good photographic quality
which is superior in many respects to laboratory produced results. This
special coating allows inks to be perfectly controlled so that they adhere
more effectively to the surface of the carrier. Sihl
SpiriTac Film SA 190 is available in reels, 20 m
long and 36" wide, Sihl's Spirit Film 130
comes in a length of 30 m and widths of 17", 24", 36",
42", 44", 50", 54" and 60".
More information: www.sihl.com
Top
18) Printing Carpets: New printable
stage floor a big success
Printing
Carpets is specialized in producing and supplying carpets for the large
format digital and sublimation market. Printing Carpets has found the right
combination and has produced an original stage floor (theatre floor) which
was from origin with a black side and a white side in total white pvc. The new stage floor can be printed with Solvent-,
Eco Solvent- and UV-inks. Printing Carpets supply the excellent printed stage
floor in rolls of 50 x 150 wide and can also cut the roll in a smaller size
in their 1000 square feet warehouse. Printing Carpets has also set in a high
tech new dye sub carpet and the latest updated solvent carpet in a new yarn
which can be dyed very good. Printing Carpets manufactures 19 printable
media, carpets and floor mats.
More information: www.printingcarpets.com
Top
19) Junkers & Müllers:
Acid test on ice
 Mediatex Presto already passed its first acid test with
flying colours when the ceiling of the indoor
skiing arena in Neuss, Germany had to
be re-clad at the end of last year. The Management was on the lookout for a
printable textile that could be used in the restyling of the hall’s ‘sky’.
Just the perfect conditions for Junkers & Müllers’
Mediatex Presto, a water-repellent and waterproof
textile that will not show any moisture stains even after years of
installation. The product is also stretchable and can therefore be easily
installed into the existing internal ceiling frame system. And high-grade print
brilliance guarantees outstanding image results – in this case a
photo-realistic representation of a sky that is covering the entire catering
and entrance area of the ski hall with beautiful fair-weather clouds. In the
first instance only a small section of the entrance hall was covered with the
printed fabric, so that the impact of the motif as well as the quality of the
material could be established. However, the arena’s management was so
delighted with the results that Junkers & Müllers’
Mediatex Presto passed the acid test and has now be
installed on the entire 500 qm of ceiling space. Mediatex Presto is available in width of up to 308 cm and
can be printed with all solvent, eco-solvent and UV-hardened inks. It is also
certified in accordance with the Oeko-Tex standard.
More information: www.jm-techtex.com
Top
20) Esko: Presidential inauguration gets a
helping hand from Kongsberg
Few
people watching the inauguration of Barack Obama as 44th President of the United States would have realized the role EskoArtwork's Kongsberg i-XL
played in the proceedings. For Hargrove Inc, a management firm for special
events, custom exhibits and trade show services which has been a major
contractor for every presidential inauguration since 1949, time was of the
essence. The company had seven days to provide all the services for the
inauguration: ten balls, three dinners, seven floats and many other events
which entailed 44 separate jobs in 34 different venues over six days. Most of
the decorations used in these events were printed on a VUTEk
QS3200 large format printer and cut on an EskoArtwork
Kongsberg i-XL. Hargrove CEO Tim McGill said:
"It was extremely gratifying to be able to fabricate some of the unusual
components for major Inaugural events like the concert at the Lincoln
Memorial and the Neighborhood Ball." Hargrove produced a
10,000-square-foot floor for the performers at the Lincoln Memorial as well
as the faux walls used to hide the scaffolding, some 22-feet tall, and the
moveable walls that closed and opened to allow for set changes.
More information: www.esko.com or
www.hargroveinc.com
Top
21) ONYX Graphics: New website
launched
 Fresh
colors, modern design and simplified navigation clearly position ONYX as an
innovative and modern player in the market. The new website is designed to
inform, educate and entertain. It will help potential customers determine
which products are best suited to their specific needs and help them quickly
find information. Rather than being RIP-focused and very technical, the new
web site reflects ONYX’s understanding of the
complete printing workflow and its evolution from RIP specialist to a
multi-product company. ONYX’s ambition is to
provide solutions at each step of its customers’ workflow, from creation of a
design to job preparation, to production, and to an analysis of the entire
process. While the Driver and Media Download pages had been simplified, the
updated Training Center offers
a wealth of training materials such as technical presentations, tech clips
and white papers.
More information: www.onyxgfx.com
Top
22) ASLAN: New website shows ASLAN at
its best site
ASLAN has
started off the year with the launch of a new, innovative website, aimed at
providing visitors with a simple and informative way of exploring the entire
range of ASLAN films. Now, both users who are familiar and those who are not
so familiar with the ASLAN range can find the self-adhesive product they’re
looking for even more quickly. The search function, a user-friendly menu
divided into applications and industries and the site navigation path help
them find their way around. The site has a new look plus numerous additional
features and services that enhance its appeal. Product images provide users
with inspiration for interesting applications and colour
palettes indicate the wide selection of coloured
films available. Clear descriptions of the products’ advantages and
characteristics make them even more transparent for the user. There’s also a
downloadable technical data sheet for each type of film. For users who’d like
to know more about this innovative supplier of speciality
film products there’s also a chance to discover some interesting facts about
the development of this family-owned company that has a product history
spanning more than 50 years.
More information: www.ASLAN-schwarz.com
Top
23) SAi appoints FlexiTeam
as the exclusive distributor for DACH
 SA
International (SAi), provider of Solutions for the
Professional Sign Making, Digital Printing and CAD/CAM for CNC Machining
Industries, appoints FlexiTeam as the exclusive
distributor for Germany, Austria and
Switzerland (DACH). With this agreement, FlexiTeam
will be in charge of all commercial sales, service, and support related
matters for SAis software,
including the maintenance and expansion of the SAi
reseller channel. FlexiTeam will function as the
main contact point for all SAi resellers in DACH. SAi is very excited about this
appointment as it enables the company to not only offer the existing
resellers the service and support needed, but also to grow its end-user
install base. SAi is committed to delivering what
is needed to drive the growth of SAi products in
these countries. With over 15 years of experience with SAi
products, FlexiTeams owner and General Manager,
Andreas Leimbach, continues to be fully committed
to supporting and selling SAi software in DACH. SAi believes that all resellers and end-users will
benefit from this new development.
More information: www.saintl.biz and www.flexiteam.de and eMail: info@flexiteam.de
Top
24) Josero: Master distribution agreement
with Triangle
Inkjet
Consumable Specialist Josero is pleased to announce
a master distribution agreement with Triangle Inx. The agreement is covering
the distribution of the complete range of Triangle Inx Inkjet Products for
the United Kingdom and Ireland. In close collaboration with Anteprima Srl (European base of
Triangle Inx), Josero will now roll out the
advanced range of Triangle Inx products in the UK market. “We were looking to
associate our name to a well known brand in order to develop our home market
sales”, says Loic Delor,
Managing Director of Josero Limited, “Triangle Inx
have by far the best alternative ink solutions both in term of print quality
and reliability. The combination of our experience and the solutions provided
by Triangle Inx will provide excellent opportunities for printing companies
that are looking to reduce production costs, as well as improving their
current print quality”. Triangle Inx has a wide range of wide and grand
format inks, and has been recognized as an excellent ink solution for a
number of years.
More information: www.triangleinx.co.uk or
www.josero.com
Top
25) Poli-Tape acquires division from Kemica SpA
Poli-Tape
Group (Germany) has acquired the graphics and
sign materials division from Kemica SpA (Italy). Kemica
SpA has two manufacturing facilities: in Cornaredo (Milano) and Savogna d’Isonzo (Gorizia); the acquisition concerns only the full activity
of Savogna d’Isonzo
plant. This acquisition is part of strategy to strengthen the competitive
position of Poli-Tape Group worldwide. Founded in
1974, Kemica SpA is a
successful worldwide supplier for sign and digital products and industrial
tapes. The acquisition of this branch of Kemica Spa
will perfectly complement the existing product range and activities of Poli-Tape Group, providing synergies and development in
various areas such as sales, operation and technologies. The transfer of
business will be effective on 1st of March 2009 when new company Kemica S.r.l. will assume all
operative activities. Although being part of Poli-Tape
Group, Kemica S.r.l. will
continue to operate fully independently with the Managing Directors, Sven Möhren and Gerardo di Napoli. All customer related functions, such as order
processing and sales, will be concentrated in Savogna
d’Isonzo (Gorizia).
Purchasing and Accounting will be located in Castelmella
(Brescia). In order to provide best
service and quick delivery time to the customers, all standard products will
be available ex stock starting from the second quarter of 2009.
More information: www.poli-tape.de
Top
26) Screen takes Truepress
Jet2500UV on European Tour
Screen is
taking the opportunity to show its award-winning Truepress
Jet2500UV large format printer at a string of open houses and exhibitions
around Europe during February, March, April and
May. Visitors will be able to see for themselves the high quality output that
this machine is capable of producing and the wide range of applications to
which it is suited. The Truepress Jet2500UV was
recently awarded 'New Product of the Year' by the Digital Printing &
Imaging Association. It supports a maximum output resolution of 1,500 dpi
which combined with the drop-on-demand, eight-level grayscale printhead and Screen's exclusive screening technology
gives smooth gradations for photo-quality colour
printing. It can easily produce high-quality printing on vinyls,
paper, acrylic, glass, tiles, doors, blinds, plastics, plywood, ceramic tiles
and corrugated plastic materials up to a thickness of 50 mm and 2,500 mm
wide. The Truepress Jet2500UV can be seen at the
following open houses and exhibitions: Portugal: 26-28 February, Stag booth (12),
Pro Digital, Lisbon, Slovenia: 10-18 March MCA's facilities, Maribor, UAE: 6-9 April Gulf Print,
Airport Expo, Dubai and Netherlands: 12-14 May, Stand B140, FESPA
Digital, Amsterdam.
More information: www.screeneurope.com
Top
You receive the LFP-Newsletter.com on a regular basis per email for
free. You can always cancel your Newsletter subscription by writing an email.
You like to have a short view on already published releases? www.lfp-newsletter.com
There is something you like to publish? Mail to press@lfp-newsletter.com
You have any question or incitation? editor@lfp-newsletter.com
You like to subscribe the LFP-Newsletter? subscribe@lfp-newsletter.com
or to cancel the subscription?
unsubscribe@lfp-newsletter.com
© by LFP-Newsletter.com, CREACT KG, Linau- Reprint and / or use of the
entire Newsletter or parts of it does need the written agreement of the
publisher. All news and publications in the LFP-Newsletter.com are done
without recognition of existing patents; trademarks are used without any
guaranteed free usage. All rights reserved.
|
