5)
 Scitex Vision helps Indy Imaging to meet current capacity
With the competition in the US wide
format circuit heating up, Indy Imaging of Indianapolis, Indiana, USA, has
taken up the challenge and is set to take pole position thanks to its new
Scitex Vision XLjet 5+ printer, installed in March, and its Scitex Vision
XLjet 5 Premium printer which is being installed in September. The
installation of the Scitex Vision XLjet 5+ was a calculated move to allow the
company not only to move into new markets, but also to continue to meet
current capacity, as its two older presses were starting to show the strain
of the unrelenting pace of production. Robbie Gordon, President of Indy
Imaging explains, “We needed a machine which would set us apart from the
competition, and give us the confidence to build upon our current capacity,
as well as to branch out into new markets. Winning new customers are all down
to producing high quality work and having a flexible machine that’s capable
of fast turnaround, things we felt that the Scitex Vision XLjet 5+ was easily
able to address.” He continues, “The machine’s versatility to run on so many
flexible substrates cost-effectively, from wallpaper to backlit film, canvas
and carpet made it the obvious choice for its first big job.” Robbie couldn’t
have chosen a more high profile event than the Indy 500 to demonstrate the
performance of his new printer. “The ability of the Scitex Vision XLjet 5+ to
print directly to mesh was a big factor in this job, we saved time and
materials through being able to switch directly from printing vinyl to mesh
in just a few minutes, without the cumbersome rail and paper feed system like
other presses. The machine’s ability to run at speeds of 1,022 sqft/hr (95
sqm/hr) allowed us to turn the job around in less than two days, which is no
mean feat when you consider that we printed one 20’ x 100’ banner for the
entrance to the grandstand and sixteen 18’ x 18’ banners to go around the
bleachers.”
More
information: www.scitexvision.com
Top
 In light of the successful penetration of the Matan JetSetP in
Europe, following its launch at FESPA 2005, Matan Digital Printers will
exhibit its latest industrial, wide-format inkjet printer at viscom. This
digital solvent printer, utilizing innovative Hitachi inkjet technology, is
available in 3.2 meters. It prints six colors with an apparent 600 dpi
resolution. The Matan JetSetP supports multi-roll and backlit features. The
new optional accessories, which Matan exhibits at viscom, include a jumbo
media roll feeder and media collector for an efficient finishing process,
enabling superior performance in production environments. For maximal output
quality the Matan JetSetP utilizes supreme Matan inks, optimized for this
product line. These high durability inks have vivid colors and ensure extra
high consistency between batches. Matan has lately announced its new
availability for consumables in a warehouse located in Belgium and has
significantly reduced its ink prices for the European market. One of the more
recent European installations of the Matan JetSetP the company has made at DPM,
just north of Hanover. The dpm GmbH is a family-owned company, which sells
application-oriented product solutions for the large format digital printing
industry in Germany. Matan Digital Printers is a leader in development,
manufacturing, and marketing of cutting-edge digital printers, and presses
for a wide range of industrial applications. viscom:
hall 6, booth F 41
More
information: www.matanprinters.com
Top
 Mutoh will show at viscom its latest revolutions in the
wide-format piezo printer industry, i.e. the Osprey, the Spitfire 65/90, the
Spitfire 100, the Phoenix, and the Viper TX. The Osprey uses high-speed
solvent based double density inks, making it possible to print directly onto
standard uncoated PVC and banner materials. In production mode, its maximum
speed amounts to 46.5 sqm/h. It incorporates two heating elements, one for
media acclimatization before printing and the other one for post-conditioning
of prints. Head height is adjustable in five steps, from 2.5 mm up to 4.5 mm.
The Spitfire 65"/90" have respective printing widths of 1643 mm and
2250 mm and offer real time print speeds of up to 13 sqm/h on uncoated
materials. Application possibilities encompass production of mid-term outdoor
durable signs, such as corporate signs, stage and window graphics, POS
displays, vehicle graphics and more. Spitfire 100 is a 102" wide printer
and delivers real time production speeds up to 22 sqm/h on uncoated
materials. The Phoenix is a machine that offers maximum media and print
widths of 3.3 meter, with maximum roll weights of 200 kg. It incorporates a
motorized 10 kg head carriage for multiple print heads, bulk ink supply and
for additional curing equipment. The Phoenix is equipped with sophisticated
media movement technology, i.e. a special single-operator media
loading-system. The Viper TX is available in 1653 mm and 2280 mm size. The
new Viper TX series are able to print directly onto non-stretch textile with
open or closed structure, such as PES flag, cotton, silk and so on. Viper TX
is targeted at short run volumes, varying from sample creation to small lot
production. The printer incorporates an ink gutter, which is positioned under
the printing path to collect all ink not absorbed by the textile. viscom: hall 6, booth G 10
More
information: www.mutoh.be
Top
8)
Encad shows the Kodak 1200i System
Encad, part of the Kodak Graphic
Communications Group, has announced that its Kodak 1200i Wide-Format Printing
System will be demonstrated in Düsseldorf, at the forthcoming viscom
exhibition. The Kodak 1200i wide-format printer is on show via Encad’s
distributor Nonius. The dual component rapid evaporation drying system
improves drying efficiency, allowing for rapid dry times for instant take up
and faster print-to lamination time. The patented Intelligent Mask Technology
optimizes color gamut, density, and vibrancy without compromising speed. In
addition, Kodak Quantum Inks, developed with Kodak’s experience of over a
century of color imaging science, deliver an expanded color gamut, enhanced
durability and longevity for both indoor and outdoor applications. viscom: hall 6, booth E 16
More information: www.encad.com
Top
Karl Gröner GmbH presents the Fast
T-Jet. With its new technology printing on white and light colored shirts the
Fast T-JET reached a new level in textile printing. Alongside Fast T-Jet
standard, there will be an advanced version of the printer which will offer
the option to print on three shirts simultaneously and offers more
flexibility and productivity on various formats. In the LFP section Gröner
presents a new wide size UV printer produced by Neolt from Italy which
enables high performance printing on flexible or solid materials up to 50 mm
height. Another highlight will be the Seiko 100S, a solvent printer which can
print up to 260 cm width. The innovation for screenprinters is FastFilms.
This easy to use software product allows users to create high-end color
separations within minutes. In collaboration with FastRip which is a
supplementary software product responsible for the output on film, the
software guarantees optimized workflow and amazing quality. viscom: hall 6, booth G 40
More
information: www.groener.de
Top
GBC Films Group Europe, part of ACCO
Brands Corporation, announces their distributor TEPEDE Graphics, will
demonstrate the Talon 64 laminator at both Print & Sign 2005 in
Kortrijk/Belgium and viscom in Düsseldorf/Germany. The Talon 64 is designed
for mid-range volume finishing and will be demonstrated as a versatile
wide-format finishing solution for indoor and outdoor applications for medium
term use. The Talon 64 is also capable of finishing prints with both head
activated films as well as all pressure sensitive films and adhesives up to
64” in width. TEPEDE, the specialist for large-format printing, is
represented in nine countries with its own companies and partnerships.
viscom: hall 6, booth
K 59 and Print & Sign 2005: hall 4, booth 4123
More
information: www.gbc.com
Top
 Scanvec Amiable Europe announces the availability of Service Pack
1 for its PhotoPRINT Family V4.6v2 of professional Digital Printing
solutions. Due to the certified Adobe® PostScript® Level 3 interpreter, a
selectable color management engine and Spot Color Matching with licensed
PANTONE libraries, highest possible output quality is ensured as well as
compatibility with all popular file-formats. The PhotoPRINT Family V4.6v2 SP1
comes standard with extensive driver support for all popular large/wide
format printers and even offers Two Printer Simulation, allowing
pre-production proofing. PhotoPRINT Family V4.6v2 SP1 also excels in the
"Contour Cutting" arena: use any combination of printer and vinyl
cutter, to create your own Virtual Hybrid Device for Print&Cut jobs and
easily expand your business opportunities using a proven workflow approach,
now even includes barcode and cutserver support for the Mutoh Ultima cutters.
The PhotoPRINT Family V4.6v2 SP1 adds driver-and ICC-profile support for new
output devices from DGI, Graphtec, Infiniti, Mimaki, Mutoh, Roland and
others, all included with each product as standard. Existing PhotoPRINT 4.6v2
Family users can obtain to this new release “free-of-charge”. This new
PhotoPRINT Family V4.6v2 SP1 will be, next to new FlexiFamily V7.6v2 SP1
release and EnRoute 3 Family, among the professional solutions for the
Signmaking-, Screenprinting- and LFP-markets on display at the Scanvec
Amiable Europe booth C 41 in hall 6 at viscom.
More
information: Info@ScanvecAmiable.be
Top
 ONYX GRAPHICS is happy to announce the availability of new printer
drivers for the new EPSON STYLUS PRO 9800/7800 and 9400/7400 printers and a
new driver for the ROLAND SJ 1045 for Onyx 6.5 Workflow products. For more
information visit the Onyx Driver and Media library
http://www.onyxgfx.com/download.pl?version=6.5 or contact your authorized
Onyx distributor. See Onyx products also at viscom in
hall 6 with following partners: Mutoh, booth G 10; easy, booth J 56; Complott, booth H 37;
medacom, booth C 38; Mendel, booth I 56 and Nonius, booth E 16.
More
information: www.onyxgfx.com
Top
With immediate effect, ColorGATE offers
a cost-free update for all Version 4 products for download from its website,
including the current software solutions ProductionSERVER, PhotoGATE and
ProofGATE. The new release, version 4.05, Build 195, focuses on Speed Screen,
a powerful raster technology for increase of productivity within production
environments of large format inkjet output. ProductionSERVER shows remarkable
and significantly, faster raster processing and image output speeds using
ColorGATE Speed Screen raster and with improved print quality. In comparison
with print output using the ColorGATE Crispy raster, ColorGATE Speed Screen
offers a stunningly striking RIP speed, resulting in far more efficient
production and timesavings. ColorGATE Speed Screen is the new stochastic
raster technology outputting FM quality screens, developed by ColorGATE and
Software Imaging. ColorGATE presents the new Speed Screen for the first time
at viscom at the ColorGATE booth F50 in hall 6, and
at various booths of ColorGATE distribution partners. The respective
updates of Version 4.05, Build 195, for ProductionSERVER, PhotoGATE and
ProofGATE are available for download for customers with client login at the
ColorGATE website.
More
information: www.colorgate.com
Top
 Scanvec Amiable Europe announces the availability of Service Pack
1 for its FlexiFAMILY V7.6v2 products. This new service pack, available in
all major European languages, continues to offer Sign Making businesses
innovative tools with very profitable results. By integrating finely tuned
technology with years of feedback from their Sign Making partners and users,
FlexiSIGN-PRO 7.6v2 SP1 maintains its status as the number one choice for
dependable, feature-rich Sign Making software with uncompromising quality.
With genuine Adobe® PostScript® Level 3 engine, ICC profile support and
built-in direct drivers, FlexiSIGN-PRO offers a complete set of Design,
Editing, Cutting, RIPping and Printing tools for maximum productivity.
Import- and export-filters for all popular graphic formats, ensure easy
integration within any existing workflow. Print your image, and contour cut
the decal on any printer/cutter combination, or hybrid device. Their special
4-point alignment system will account for possible media skew or distortion,
and produce accurate cuts of any length. FlexiSIGN-PRO V7.6v2 SP1 also
supports the automatic sensing capability of the latest cutter models, for
ideal, perfect output. The FlexiFAMILY V7.6v2 SP1 adds driver-and ICC-profile
support for new output devices from DGI, Graphtec, Infiniti, Mutoh, Roland,
Seiko and others, all included with each product as standard. Existing
FlexiFAMILY V7.6v2 users can obtain this Service Pack 1 “free-of-charge”.
This new FlexiFamily V7.6v2 SP1 will be, next to the PhotoPRINT Family V4.6v2
SP1 release and EnRoute 3 Family, among the professional solutions for the Signmaking-,
Screenprinting- and LFP-markets on display at the Scanvec Amiable Europe booth C 41 in hall 6 at viscom.
More
information: Info@ScanvecAmiable.be
Top
CADlink Technology Corporation launched
with the new version of Signlab 7.1 an innovative and forward looking
package. Since a long time Signlab supported Spotcolor Printing on Thermal
Printers likes the Gerber Edge, Summa DC3 and Roland PC 600. Signlab 7.1 has
taken this a step forward and supports now Spotcolor Printing on INKjet
Printers. Printing White on Inkjets has become reality and Signlab 7.1 is
ready for it. As Signlab is on one side a full Graphic and Design Program
which supports Spot Colors and on the other side a Full Stand alone RIP with
its own Interpreter designs can be created and printed. Signlab 7.1 not only
supports Printing White on Inkjets, but also has new creative functions like
Plug In support not only on Bitmaps, but also on Vector Graphics. The user
can choose between several Eye Candy Effects, which come with the Package
like Soft Shadows, Chrome, 3D Level, Gradient Glow and Corona. A simple Click
and these Effects can be applied to any bitmap, vector or shape. Additional
Effects can easily added.
viscom: hall 6, booth
E 01
More
information: www.cadlink.com
Top
 15 years in business with continuously growing success is a good
reason to invite customers to participate. TEPEDE therefore will offer
special prices and conditions for e.g. HP DesignJet series, the new Epson
series with Ultrachrome K3 ink and the production RIP from Caldera. Now it’s
settled, TEPEDE will introduce the 5 m TEPEDE Super Wide Media Collection at
viscom, Düsseldorf and Print&Sign, Kortrijk. No more big stocks at users
sites will be necessary due to short delivery time of about 1 day in central
Europe and about 3 days in other European countries. Also TEPEDE announces
that SpinJet from Techsage is now available for HP DesignJet 4000. With
double speed of the SpinJet 1000+, a max. print resolution of 2400 dpi
(interpolated) and with known accuracy between front and reverse side print,
the new SpinJet 4000 is the ideal double side printer extension for HP
DesignJet 4000. SpinJet is ideal for form proofs or imposition proofs. It
helps to save money and speeds up the process in traditional off set printing
environment. viscom: hall 6, booth K 59
More
information: www.tepede.com
Top
 Megaink has announced the release of a new ink for the Seiko Color
Painter Series of wide format printers. The new inks for Seiko Color Painter
Series deliver rich color, high-density, fast-drying and perfect adhesion to
the media and wide color gamut. The new inks are offered with the option to use
Light Cyan and Light Magenta or with Orange & Green. These inks are the
first in the world Orange & Green solvent-based inks offered for Seiko
Color Painter Series. Orange & Green inks provide a much wider color
gamut and spectrum, near the RGB color space. The printing of special or spot
colors can now be achieved with much greater ease with the Megaink Orange
& Green inks. ”Again, we are very proud to be the first to come out with
a complete solution for new printers. Megaink inks for the Seiko Color Painter
Series have been specially designed to achieve maximum outdoor durability and
ensure 100% compatibility with Seiko Color Painter line of printers” said Mr.
Andrej Keblusek, Megaink’s Managing Director. “Our true solvent inks with a
“NOMESS” refillable bulk system for the Seiko Color Painter Series will
enable our customers to print on wider variety of substrates”.
More
information: www.megaink.biz
Top
Continental Grafix Ltd. has
significantly improved its leading self-adhesive product panoRama Optima and
has it relaunched with the appendix “Plus”. More and more European customers
have switched to panoRama Optima since its launch 18 months ago. It has
become one of the strong selling products. The intention was to offer an
economically priced option to the high quality window films among the
panoRama range. The customer could always choose between different perforation
patterns and backing liners. Now the so far known panoRama Optima has been
relaunched with the new name “panoRama Optima+”. The improved film features a
thickness of 120 microns and is clearly more robust than its forerunner. The
long-term adhesion has also been improved. Improved handling and shelf life
are just some benefits due to these alterations. The order possibilities with
different variances have not been changed for the customer. He can still
choose between standard polyester backing liner or the advantageous solution
with paper liner. Optima+ is available with 1550 perforation pattern – 1.5 mm
hole size with 50 % open area. This pattern is ideal for application on
vehicles for which it has been certified by German Kraftfahrt Bundesamt.
Seals can be supplied upon request. Continental Grafix supplies the 2050
pattern for big projects and building wraps. The holes with 2 mm diameter are
arranged in such a way that still 50 % of the media can be printed on. This
product is available upon request supplied with backing liner according to
your needs. Furthermore a second laminate has also been launched together
with Optima+ which is at high quality standard and economically in price.
panoProtect is an ultra clear PET laminate and available as from now.
More
information: www.continentalgrafix.com
Top
Germany-based SCP Software GmbH links
up its own large-format scanning and copying software Colorado (a.k.a.
CopySystems) to the document management solution DvTDM. The newly released
software version Colorado 2005 allows scanning large-format documents
directly into DvTDM, guaranteeing a smooth, easy and efficient workflow. In
DvTDM the user has to define what kind of file identification data he needs
for his scanned documents. These parameters, such as file name and storage
path, he can then enter in the scan-to-DvTDM section of Colorado 2005. This
way, Colorado and DvTDM seamlessly fit together as a user-defined, fully
integrated solution for scanning and managing large-format documents.
More
information: www.scp.de and www.practicalprograms.com
Top
CostView is the dynamic assistant to
help customers evaluate their printing costs and margins. Caldera Graphics
was the first RIP editor to propose the terrific CostProof feature, and now
it continues to develop revolutionary features, like CostView, the first tool
to help users sell large format prints. The company had presented it at
viscom in Paris in the middle of September. CostView distinguishes itself by
an ability to adapt to any plant of machines, by taking into account the
brand, model, media etc. It is a revolutionary tool to control sales margins.
It will change the way users compute their margins. This function will allow
users to define their own relations between the cost of ink, media, and
printers. All printers driven by Caldera Graphics will be automatically
recognized by the system and associated to compatible media. Users simply
have to enter the financial data (fixed or variable expenses) into CostView
and manage the amount of their services. It is a simple and visual yet
powerful tool, and a software package designed to suit the needs of
reprographers or sign specialists. CostView is based on an intuitive wizard,
allowing a step-by-step project. Users will have a visual feedback of their
project, the ink amount on the media, the price, and all details about the
job in progress. CostView uses the CostProof engine to accurately calculate
the cost of any jobs. It can then apply user-defined costs, margin
calculations, and additional processing costs. viscom:
hall 6, booth K 59 (TEPEDE)
More
information: www.caldera.fr
Top
NUR Macroprinters announces tests for a
new and enhanced version of its control software for the NUR Tempo and NUR
Expedio wide-format inkjet presses. The new NUR PrinTop II control software
will include a host of new features designed to give NUR Expedio and NUR
Tempo users more control over the production workflow, reduce waste and
errors, and provide more information about ongoing processes. A new,
friendly, and intuitive Graphic User Interface is a key element in the new
software to help shorten the learning curve, ensure higher utilization of
system tools, and reduce errors. A single window now provides access to all
common production operations including job control, press status, printhead
controls, substrate motion, tool tips, and other information. This saves time
and delivers increased control. The new software also makes a wider range of
information about press operation and job status more easily available.
Additional new features in NUR PrinTop II control software include for
example: revamped job queuing and management, job editing capabilities while
printing, job tracking capabilities, new “what you see is what you get” preview
provides a detailed progress indicator and shows status of tiling and “step
and repeat” operations. Starting in November 2005, NUR PrinTop II software
will be included with all NUR Tempo and NUR Expedio printers. Current Tempo,
and Expedio users can purchase an upgrade to NUR PrinTop II. viscom: hall 6, booth G 30
More
information: www.nur.com
Top
Colourgen has announced the immediate
availability of the new ColorPainter 100S solvent inkjet printer from Seiko I
Infotech. The ColorPainter 100S offers many of the features and functions of
the popular ColorPainter 64S, including the same advanced six-color solvent
EG-outdoor Ink set, as well as several distinct improvements. It offers media
support for rolls up to 101 kg, a new 540 x 720 dpi, 4-pass, bi-directional
print mode that offers 20 sqm/hour speed with superb color density, optional
mesh media printing without liner, double-side printing and double-roll
side-by-side printing. The ColorPainter 100S grand-format printer features
six industrial piezo-electric heads, with 512 nozzles each, (for a total of
3,072 nozzles). It boasts speeds of up to 30 sqm/hour, a true resolution of
720 dpi, and the capability to print onto uncoated media up to 104” wide. The
ColorPainter 100S is available immediately from authorized Colourgen
resellers.
More
information: www.colourgen.com
Top
23)
ONYX
GRAPHICS: New
Relationship to Enhance Print Solutions
 ONYX GRAPHICS announced that it has signed a multi-year agreement
with Scitex Vision to provide integrated solutions for wide format and
super-wide format printing. The agreement includes several elements including
additional software enhancements specific to Scitex Vision printers, provided
by Onyx Graphics; joint development of production workflow models and speed
for future software releases; an internal process for escalating Scitex
Vision customer issues; software update procedures that assure best end-user
printing results; and hands-on software training schedule for Scitex Vision
sales, support and development personnel. Products supported under this
agreement include the world’s fastest large-format printer, the TURBOjet®,
and all of Scitex Vision’s other super-wide and wide-format printers. Scitex
Vision’s printers are used to print vehicle wraps, indoor and outdoor signs
and banners, billboards, window graphics and building wraps on a wide range
of substrates. The elements of the agreement are available to customers
purchasing Onyx ProductionHouse or Onyx PosterShop Scitex Vision Edition,
from Scitex Vision. See Scitex Vision with Onyx Graphics products at Sign
Madrid/Spain (hall 10, booth 475) and viscom Milan/Italy (hall 15, booth
C20).
More
information: www.onyxgfx.com
Top
ACCO Brands Corporation is the
newly-created company formed through the spin-off of Fortune Brands’ ACCO
World office products unit and its merger with General Binding Corporation
(GBC), which was officially completed in August 2005. ACCO Brands becomes one
of the world’s largest manufacturers and suppliers of branded Office &
Print products with global annual revenues of approximately $ 2 billion, of
which approximately 28 percent comes from its European operations. David
Campbell, ACCO Brands’ Chairman and Chief Executive Officer, said, “this marks
the start of what we expect will be an exciting future for ACCO Brands in
Europe, as we focus on stepped-up product innovation as well as further
developing our low-cost supply chains and shared services through our
extensive network of trading companies and manufacturing centers in Europe.”
More
information: www.accobrands.com
Top
INKWARE, a VUTEk company, which is a
division of EFI, announces the appointment of Stephen Emery as the INKWARE
OEM sales and marketing manager. Emery will be responsible for increasing
worldwide business relations with existing and new OEM customers and
third-party ink businesses. Emery comes to INKWARE with more than 20 years experience
in the digital imaging industry. Most recently, he ran the worldwide sales
and marketing for American Ink Jet Corporation, Billerica, Mass. His focus
will be on better understanding customers’ needs, emerging applications, and
opportunities to capitalize on INKWARE’s expertise in solvent and UV curable
inks and new technologies. INKWARE has been manufacturing premium quality
inks for the durable digital printing industry since 1994.
More
information: www.inkware.com
Top
When ITMA Asia in Singapore runs on
October 17 - 21, 2005, BASF will be presenting in hall 6, booth 6D-01,
innovative products and processes for textile processing that have proved
their worth both economically and ecologically. The focus is on innovative,
eco-friendly products. “We use modern technologies to offer products with new
or improved properties. That advantage in quality, efficiency, and
eco-friendliness enables customers to achieve a better market position”,
expains Hartmut Hasse, head of Performance Chemicals for Textiles Asia.
Therefore, at ITMA Asia, BASF is presenting solutions for virtually every
textile-processing sector. The range comprises products and concepts for
weaving, pretreatment, analog, and digital printing, coating and finishing as
well as dyeing auxiliaries.
More
information: www.basf.com
Top
With two more months to go to November
Visual Communication already presents both an increase in exhibitors and
exhibition space over 2004 by 12 percent. This increase the organizers have
equally divided over all segments present during the Show, Signs and sign
making, Large Format digital Printing, Screen-printing, and POP, and
engraving. One of the decisive factors for this increase has been the
addition of a new industry segment within Visual Communication. “Event
Services and Communication” the industry dedicated to event organizers and service
providers, which will make Visual Communication Italy even more unique and
will supply their exhibitors with access to a new and dynamic market. Thirty
new exhibitors from the event industry have identified in “evex” the perfect
stage to launch new event technologies and services that combined with 292
traditional Visual Communication exhibitors will once again be one step ahead
of the industry. The Sign Show in Italy held from 10 to 12 November, will
take place in hall 15 and 16 of Milan Fairground. Visitor pre-registration is
in full swing.
More
information: www.visualcommunication.it
Top
Good bye, see
you next month
Yours LFP-Newsletter editorial team
You will get the next LFP-Newsletter.com in the middle of October.
You like to
have a short view on already published releases? www.lfp-newsletter.com
There is
something you like to publish? Mail to press@lfp-newsletter.com
You have any
question or incitation? editor@lfp-newsletter.com
You like to
subscribe the LFP-Newsletter? subscribe@lfp-newsletter.com
or cancel
subscription? unsubscribe@lfp-newsletter.com
©
by LFP-Newsletter.com, CREACT KG, Linau- Reprint and / or use of the entire
Newsletter or parts of it does need the written agreement of the publisher.
All news and publications in the LFP-Newsletter.com are done without
recognition of existing patents, trademarks are used without any guaranteed
free usage. All rights reserved.
|
